3-Pin MIL Female to BNC sensor cable.
3 ft black sensor cable with a 3-pin female MIL-style connector on one end and BNC connector on the other. Commonly used with compatible vibration and temperature accelerometers.
Always verify the sensor manufacturer’s pinout before use. 3-pin MIL-style connectors are commonly used for vibration + temperature sensors, but wiring may vary by manufacturer and model.
This 3 ft black sensor cable is designed for compatible accelerometers and vibration sensors using a 3-pin MIL-style connector. One end of the cable features a 3-pin female MIL-style sensor connector, while the opposite end is terminated with a BNC connector for connection to compatible test, monitoring, or calibration equipment.
3-pin MIL-style accelerometer connections are commonly used with dual-output vibration and temperature sensors. In many common sensor configurations, Pin A carries the vibration signal and IEPE power, Pin B is common/return, and Pin C carries the temperature signal.
This cable is useful for vibration testing, sensor verification, field service, and calibration setups where a 3-pin sensor connection is required.
Specifications
Cable Length: 3 ft
Cable Color: Black
Sensor End: 3-pin female MIL-style connector
Instrument End: BNC connector
Typical Pinout: Pin A = Vibration Signal / IEPE Power, Pin B = Common / Return, Pin C = Temperature Signal
Application: Accelerometer and vibration sensor connection
Compatibility Note
Connector wiring can vary by sensor manufacturer and model. Always verify the sensor pinout before use.
